OBD1 Senzori, Konektori i boje žica

By courtesy of clean_sol93 sa foruma http://teamsolcal.com/ jedan vrlo, vrlo koristan post:

Gray Plug Injector 1 Yellow/Black-Yellow
Injectors<br /> Gray Plug Injector 1<br /> Yellow/Black-Yellow

Injectors
Gray Plug Injector 1
Yellow/Black-YellowGray Plug Injector 2 Yellow/Black-Blue

Gray Plug Injector 2<br /> Yellow/Black-Blue
Gray Plug Injector 2
Yellow/Black-Blue
Gray Plug Injector 3 Yellow/Black-Red
Gray Plug Injector 3
Yellow/Black-Red
Gray Plug Injector 4 Yellow/Black-Brown
Gray Plug Injector 4
Yellow/Black-Brown
Intake Air Temperature (IAT Sensor) White Plug 2 Wires Green/White-Red/Yellow
Intake Air Temperature (IAT Sensor)
White Plug 2 Wires
Green/White-Red/Yellow
Location of IAT and Injectors
Location of IAT and Injectors
VTEC Solenoid Gray Plug 1 Wire Green/Yellow
VTEC Solenoid
Gray Plug 1 Wire
Green/Yellow
VTEC Oil Pressure Sensor Green Plug 2 Wires Black-Blue/Black
VTEC Oil Pressure Sensor
Green Plug 2 Wires
Black-Blue/Black
Location of VTEC Solenoid Pressure
Location of VTEC Solenoid Pressure
Vehicle Speed Sensor (VSS) Gray Plug 3 Wires Black-Yellow/Blue-Yellow/White
Vehicle Speed Sensor (VSS)
Gray Plug 3 Wires
Black-Yellow/Blue-Yellow/White
Location of VSS
Location of VSS
Throttle Position Sensor (TPS Sensor) Gray Plug 3 Wires Green/White-Red/Blue-Yellow/White
Throttle Position Sensor (TPS Sensor)
Gray Plug 3 Wires
Green/White-Red/Blue-Yellow/White
Location of TPS
Location of TPS
Thermostat Ground Loop Connector 4 Wires Brown/Black-Black/Red Black-Black
Thermostat Ground
Loop Connector 4 Wires
Brown/Black-Black/Red
Black-Black
Starter Female End 1 Wire Black/White
Starter
Female End 1 Wire
Black/White
Reverse Sensor Gray Plug 2 Wires Green/Black-Yellow
Reverse Sensor
Gray Plug 2 Wires
Green/Black-Yellow
Reverse Sensor Gray Plug 2 Wires Green/Black-Yellow
Reverse Sensor
Gray Plug 2 Wires
Green/Black-Yellow
Location of reverse sensor
Location of reverse sensor
Location of Map sensor
Location of Map sensor
Manifold Absolute Pressure (MAP Sensor) Gray Plug 3 Wires Yellow/Red-Green/White-White
Manifold Absolute Pressure (MAP Sensor)
Gray Plug 3 Wires
Yellow/Red-Green/White-White
Oil Pressure Switch Black Plug 1 Wire Yellow/Red
Oil Pressure Switch
Black Plug 1 Wire
Yellow/Red
Location of IACV
Location of IACV
Fan Switch (Engine Coolant Temperature Switch) Gray Plug 2 Wires Black-Green
Fan Switch (Engine Coolant Temperature Switch)
Gray Plug 2 Wires
Black-Green
Location of Fan switch (ECT)
Location of Fan switch (ECT)
Engine Coolant Temperature Sensor (ETC) Gray Plug 2 Wires Red/White-Green/White
Engine Coolant Temperature Sensor (ETC)
Gray Plug 2 Wires
Red/White-Green/White
Location of ECT sedning Unit
Location of ECT sedning Unit
Engine Coolant Sending Unit Black Plug 1 Wire Yellow/Green
Engine Coolant Sending Unit
Black Plug 1 Wire
Yellow/Green
Starter from Battery and Starter from Harness
Starter from Battery and Starter from Harness
Distributor Plugs Gray Plug Large: 7 Wires Yellow/Green-Blue/Green-Orange/Blue-Orange Blue/Yellow-White/Blue-White
Distributor Plugs
Gray Plug Large: 7 Wires
Yellow/Green-Blue/Green-Orange/Blue-Orange
Blue/Yellow-White/Blue-White
Gray Plug Small: 2 Wires Black/Yellow-Blue
Gray Plug Small: 2 Wires
Black/Yellow-Blue
Alternator Plug Green Plug 4 Wires White-Blue-Black/Yellow-White/Blue
Alternator Plug
Green Plug 4 Wires
White-Blue-Black/Yellow-White/Blue
Location of Alternator and Oil Pressure Switch plugs
Location of Alternator and Oil Pressure Switch plugs
Location of Oil pressure Switch
Location of Oil pressure Switch
Idle Air Control Valve (IACV) Gray Plug 2 Wires Blue/Yellow-Yellow/Black
Idle Air Control Valve (IACV)
Gray Plug 2 Wires
Blue/Yellow-Yellow/Black
Oxygen Sensor Gray Plug 4 Wires White-Green/White-Yellow/Black-Orange/Black
Oxygen Sensor
Gray Plug 4 Wires
White-Green/White-Yellow/Black-Orange/Black
Click here for reuse options!
Copyright 2014 HONDA